How Do You Put A Kick Plate On?

There is a regular hustle of guests at places like restaurants and coffee shops. Due to this, door kick plates are usually used there. Waiters have their hands full, it's easy to kick the bottom of the door to open it. If the door has a magnetic door kick plate on it, people can kick the door open easily.

In today's world, oil rubbed bronze kick plate is also becoming more and more popular in homes and restaurants. Have you ever been holding a lot of grocery bags and accidentally kicked the door open? If yes, then maybe you should put kick plates on your front door. There are no more dents or scuff marks.

Door kick plates are not only very useful and help your front door last longer, but they can also be a decorative element for your front door. Different finishes are available for kick plates to match your door or add a little color or color contrast to it.

If you want to put commercial door kick plates on your front door, this guide will show you the ideal way. It will also show you how to choose the right kick plate for your door.

● First, you'll need to measure your door to make sure you buy the right kick plate for your door. This is the most important thing to do. Choose a kick plate that has at least a 2-inch difference in width from your door. Then you will have 1 inch of space on both sides of the door.

In terms of the height of the kick plate, we would recommend leaving 1 inch at the bottom as well, however, the overall height of the kick plate depends on personal preference. Some people like long kick plates, and others like small ones.

● You can install your kick plate with the door still attached, but we think it would be easier to remove the door. This will make the whole process easier.

The kick plate should be on the bottom of the door. Use a tape measure to make sure you have 1 inch on each side and bottom. Then, write down these measurements with a pencil. To make sure that your drill holes are in the right place, line up the kick plate with these measurements and mark the screw holes.

● When you measure the depth of the door, put a piece of masking tape on your drill bit. If you don't know when to stop drilling, this will tell you. You don't want to drill through the door.

Drill the holes you marked. Then, place the kickplate's screw holes in line with the holes you've just drilled, and screw them in. With masking tape, hold the kickplate in place on the door to make sure it's where it should be. Then, you can start screwing it to the door.

● Once you've installed the kitchen kick plate, you can hang the door back up and open and close the door to make sure the kick plate is in the right place. Do not forget to peel the protective film off of your kick plate if it has one on.

Posted May 25, 2022 05:00